{"product_id":"w5500-ethernet-module","title":"W5500 Ethernet Module SPI to RJ45 Network Board","description":"\u003cp\u003eThe \u003cstrong\u003eW5500 Ethernet Module\u003c\/strong\u003e adds reliable 10\/100 Mbps wired Ethernet connectivity to compatible microcontroller projects through an SPI interface. Built around the WIZnet W5500 controller with an RJ45 port, it is suitable for \u003cstrong\u003eArduino, ESP32, STM32, IoT, embedded networking, monitoring and automation applications\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eDescription\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eThe \u003cstrong\u003eW5500 Ethernet Module\u003c\/strong\u003e is an SPI-based wired networking board built around the \u003cstrong\u003eWIZnet W5500 Ethernet controller\u003c\/strong\u003e. It provides a convenient way to add 10\/100 Ethernet connectivity to compatible microcontroller and embedded-system projects through an RJ45 network connection.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe W5500 integrates a hardwired TCP\/IP stack, 10\/100 Ethernet MAC and PHY, \u003cstrong\u003e32 KB internal TX\/RX buffer memory\u003c\/strong\u003e, and support for up to \u003cstrong\u003e8 independent hardware sockets\u003c\/strong\u003e. It communicates with an external microcontroller over SPI, making it suitable for embedded networking applications where reliable wired Ethernet connectivity is required. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe actual Chip.pk module features a \u003cstrong\u003eWIZnet W5500 IC\u003c\/strong\u003e, \u003cstrong\u003eHanRun HR911105A RJ45 connector\u003c\/strong\u003e, \u003cstrong\u003e25.000 MHz crystal\u003c\/strong\u003e, onboard \u003cstrong\u003e1117C 33 regulator\u003c\/strong\u003e, status LEDs, and clearly labelled SPI\/control connections including SCLK, SCS, MOSI, MISO, RST and INT.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eIt can be integrated into suitable \u003cstrong\u003eArduino, ESP32 and STM32 projects\u003c\/strong\u003e through SPI when the selected development board, wiring, power arrangement and software library are configured correctly. WIZnet provides MCU-independent W5500 drivers, Arduino resources, and STM32 example resources. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine \u003cstrong\u003eWIZnet W5500 controller IC\u003c\/strong\u003e visible on the actual module\u003c\/li\u003e\n\u003cli\u003eSPI interface for communication with an external MCU\u003c\/li\u003e\n\u003cli\u003eIntegrated hardwired TCP\/IP stack\u003c\/li\u003e\n\u003cli\u003eEmbedded \u003cstrong\u003e10Base-T \/ 100Base-TX Ethernet PHY\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports up to \u003cstrong\u003e8 independent hardware sockets\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 KB internal memory\u003c\/strong\u003e for TX\/RX buffers\u003c\/li\u003e\n\u003cli\u003eSupports TCP, UDP, ICMP, IPv4, ARP, IGMP and PPPoE\u003c\/li\u003e\n\u003cli\u003eW5500 SPI supports \u003cstrong\u003eMode 0 and Mode 3\u003c\/strong\u003e, up to 80 MHz at the IC level\u003c\/li\u003e\n\u003cli\u003eRJ45 Ethernet connector with integrated status LEDs\u003c\/li\u003e\n\u003cli\u003e25 MHz crystal visible on the module\u003c\/li\u003e\n\u003cli\u003eRST and INT connections exposed\u003c\/li\u003e\n\u003cli\u003eSuitable for compatible Arduino, ESP32, STM32 and other SPI-capable MCU projects\u003c\/li\u003e\n\u003cli\u003eUseful for embedded web servers, networked controllers, monitoring systems and IoT applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eThe controller-level networking and SPI specifications above are documented by \u003ca href=\"https:\/\/docs.wiznet.io\/img\/products\/w5500\/W5500_ds_v110e.pdf\" target=\"_blank\" title=\"wiznet w5500 datasheet\" rel=\"noopener\"\u003eWIZnet.\u003c\/a\u003e \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv dir=\"auto\" class=\"group TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable dir=\"auto\" class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eEthernet interface module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Controller\u003c\/td\u003e\n\u003ctd\u003eWIZnet W5500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHost Interface\u003c\/td\u003e\n\u003ctd\u003eSPI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Interface\u003c\/td\u003e\n\u003ctd\u003eRJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRJ45 Component\u003c\/td\u003e\n\u003ctd\u003eHanRun HR911105A \u003cem\u003e(visible on actual stock)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet PHY\u003c\/td\u003e\n\u003ctd\u003e10Base-T \/ 100Base-TX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Speed\u003c\/td\u003e\n\u003ctd\u003e10\/100 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Sockets\u003c\/td\u003e\n\u003ctd\u003eUp to 8 independent sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Buffer Memory\u003c\/td\u003e\n\u003ctd\u003e32 KB TX\/RX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Protocols\u003c\/td\u003e\n\u003ctd\u003eTCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPI Modes\u003c\/td\u003e\n\u003ctd\u003eMode 0 and Mode 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum W5500 SPI Speed\u003c\/td\u003e\n\u003ctd\u003eUp to 80 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrystal\u003c\/td\u003e\n\u003ctd\u003e25.000 MHz \u003cem\u003e(visible on actual stock)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExposed Signals\u003c\/td\u003e\n\u003ctd\u003eSCLK, SCS, MOSI, MISO, RST, INT, GND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Labels on PCB\u003c\/td\u003e\n\u003ctd\u003e5V and 3.3V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOnboard Regulator Marking\u003c\/td\u003e\n\u003ctd\u003e1117C 33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus Indication\u003c\/td\u003e\n\u003ctd\u003eRJ45 status LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eW5500 IC Operating Voltage\u003c\/td\u003e\n\u003ctd\u003e3.3 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eW5500 IC I\/O\u003c\/td\u003e\n\u003ctd\u003e5 V signal tolerant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp dir=\"auto\"\u003eThe 10\/100 PHY, protocols, sockets, memory, SPI modes\/speed and \u003cstrong\u003e3.3 V IC operation with 5 V I\/O signal tolerance\u003c\/strong\u003e are W5500 controller specifications from WIZnet. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eImportant power note:\u003c\/strong\u003e the actual Chip.pk board visibly exposes both \u003cstrong\u003e5V and 3.3V\u003c\/strong\u003e labels and contains a 3.3 V regulator. However, because an authoritative schematic for this exact generic board revision has not been verified, the 5V and 3.3V header pins should \u003cstrong\u003enot be described as interchangeable power inputs\u003c\/strong\u003e. Users should confirm the module's required wiring before connection.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eApplications\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eThe W5500 Ethernet Module can be used for projects such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMicrocontroller-based wired Ethernet connectivity\u003c\/li\u003e\n\u003cli\u003eEmbedded web servers and network clients\u003c\/li\u003e\n\u003cli\u003eIoT devices requiring wired networking\u003c\/li\u003e\n\u003cli\u003eSensor monitoring and data acquisition systems\u003c\/li\u003e\n\u003cli\u003eHome and industrial automation prototypes\u003c\/li\u003e\n\u003cli\u003eNetwork-enabled control systems\u003c\/li\u003e\n\u003cli\u003eTCP\/UDP communication projects\u003c\/li\u003e\n\u003cli\u003eEthernet-connected Arduino projects\u003c\/li\u003e\n\u003cli\u003eESP32 wired Ethernet projects\u003c\/li\u003e\n\u003cli\u003eSTM32 Ethernet and embedded networking projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eWIZnet's official driver ecosystem also provides services\/examples involving DHCP, DNS, MQTT, SNTP, TFTP and HTTP server applications. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eThe W5500 communicates with the host through \u003cstrong\u003eSPI\u003c\/strong\u003e, so it can be integrated with suitable SPI-capable microcontrollers when the hardware interface and software support are configured correctly.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eArduino:\u003c\/strong\u003e WIZnet documents Arduino use of W5500-based hardware and provides Ethernet software resources. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eESP32:\u003c\/strong\u003e The module can be interfaced with an ESP32 through SPI, subject to correct GPIO assignment, power\/wiring and a compatible W5500 software implementation.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSTM32:\u003c\/strong\u003e WIZnet provides W5500 driver resources and has published example projects for STM32F103-class hardware, supporting W5500 integration into STM32-based designs. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eCompatibility does \u003cstrong\u003enot\u003c\/strong\u003e mean the module can be connected pin-for-pin to every Arduino, ESP32 or STM32 board. SPI pins, chip-select assignment, power connections and software configuration depend on the host board.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003ePackage Contents\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003e1 × W5500 Ethernet Module\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 dir=\"auto\"\u003eFAQs\u003c\/h2\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003e1. What is a W5500 Ethernet Module?\u003c\/strong\u003e\u003cbr\u003eThe \u003cstrong\u003eW5500 Ethernet Module\u003c\/strong\u003e is an SPI-based networking module built around the WIZnet W5500 Ethernet controller. It allows compatible microcontrollers and embedded systems to connect to a wired 10\/100 Ethernet network through an RJ45 connection.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003e2. Does the W5500 Ethernet Module work with Arduino?\u003c\/strong\u003e\u003cbr\u003eYes. W5500-based Ethernet hardware is supported within the Arduino ecosystem. The exact SPI pins, chip-select pin, wiring and software configuration depend on the Arduino board being used.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003e3. Can I use the W5500 Ethernet Module with ESP32?\u003c\/strong\u003e\u003cbr\u003eYes. The W5500 can communicate with an ESP32 through SPI when appropriate wiring, GPIO assignments, power connections and compatible software are used.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003e4. Can the W5500 Ethernet Module be used with STM32?\u003c\/strong\u003e\u003cbr\u003eYes. The W5500 uses SPI and can be integrated with suitable STM32 microcontrollers. WIZnet also provides W5500 driver resources and STM32-related examples.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003e5. Does the W5500 support 10\/100 Mbps Ethernet?\u003c\/strong\u003e\u003cbr\u003eYes. The W5500 controller integrates a 10Base-T\/100Base-TX Ethernet PHY. Actual application throughput depends on the host MCU, SPI configuration, software and network conditions.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003e6. How many hardware sockets does the W5500 support?\u003c\/strong\u003e\u003cbr\u003eThe W5500 supports up to \u003cstrong\u003e8 independent hardware sockets\u003c\/strong\u003e and provides \u003cstrong\u003e32 KB of internal TX\/RX buffer memory\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003e7. Which network protocols does the W5500 support?\u003c\/strong\u003e\u003cbr\u003eThe W5500 hardwired TCP\/IP stack supports TCP, UDP, ICMP, IPv4, ARP, IGMP and PPPoE.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003e8. Is this W5500 module an Arduino Ethernet Shield?\u003c\/strong\u003e\u003cbr\u003eNo. This Chip.pk product is a \u003cstrong\u003eW5500 Ethernet module\/breakout board\u003c\/strong\u003e, not an Arduino shield form-factor board. It connects to a compatible host through its exposed interface pins.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003e9. Does this W5500 Ethernet Module include an RJ45 connector?\u003c\/strong\u003e\u003cbr\u003eYes. The actual Chip.pk stock includes a \u003cstrong\u003eHanRun HR911105A RJ45 Ethernet connector\u003c\/strong\u003e with status LEDs.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003e10. Where can I buy a W5500 Ethernet Module in Pakistan?\u003c\/strong\u003e\u003cbr\u003eYou can buy this W5500 Ethernet Module from \u003cstrong\u003eChip.pk\u003c\/strong\u003e for embedded networking, Arduino, ESP32, STM32 and IoT projects in Pakistan, subject to current stock availability.\u003c\/p\u003e","brand":"Chip.pk","offers":[{"title":"Default Title","offer_id":52997470028061,"sku":null,"price":830.0,"currency_code":"PKR","in_stock":true}],"url":"https:\/\/www.chip.pk\/products\/w5500-ethernet-module","provider":"Chip.pk","version":"1.0","type":"link"}